2015 Nissan Rogue Owner's Manual - Page 48

A child restraint with a top tether strap should only be placed in the center position of the 2nd row if there are no 3rd row occupants. Rearward adjustment of the 2nd row bench seat will result in loosening of the top tether strap for the center position of the 2nd row. Avoid moving the 2nd row bench seat or retighten the top tether strap following rearward movement of the 2nd row bench seat. If you have any questions when installing a top tether strap, consult your NISSAN dealer for details. LRS2405 Follow these steps to install a rear-facing child restraint in the 2nd row seats using the LATCH system: 1. Position the child restraint on the seat. Always follow the child restraint manufacturer's instructions. 2nd row bench seat 1. Top tether strap 2. Anchor point REAR-FACING CHILD RESTRAINT INSTALLATION USING LATCH For additional information, refer to all Warnings and Cautions in the "Child Safety" and "Child Restraint" sections of this manual before installing a child restraint. Do not use the lower anchors if the combined weight of the child and the child restraint exceeds 65 lbs (29.5 kg). If the combined weight of the child and the child restraint is greater than 65 lbs, (29.5 kg) use the vehicle's seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer's instructions for installation. Top tether anchor point locations Anchor points are located in the following locations: ● 2nd row bench on the bottom of the seatback in the seating positions shown. ● Roof above the rear cargo area. ● The top tether anchor located in the roof is only to be used for a child restraint located in the center position of the 2nd row. Safety-Seats, seat belts and supplemental restraint system 1-29