2015 Nissan Rogue Owner's Manual - Page 168

A is activated ● If the liftgate open switch ᭺ while the cinching motor is engaged, the cinching motor will disengage and release the latch. NOTE: If the pinch strip is damaged or removed, the power close function will not operate. ● The key fob button must be held for 0.5 second before the liftgate closes. B can only be ● The liftgate close switch ᭺ used to close the liftgate if the power liftgate main switch is in the ON position. WARNING There are some small distances immediately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the liftgate. LPD2270 Power Close: The power liftgate automatically moves from the fully open position to the secondary position. When the liftgate reaches the secondary position, the cinching motor engages and pulls the liftgate to its primary latch position. Power close takes approximately seven - ten seconds. The power close feature can be activated by the switch on the key fob, the instrument panel and B . The hazard lights the liftgate close switch ᭺ flash and a chime sounds to indicate the power close sequence has been started. Reverse: The power liftgate will reverse direction immediately during power open or power close if the key B fob, instrument panel or liftgate close switch ᭺ is pushed. A chime will sound to announce the reversal. Auto Reverse: If an obstacle is detected during power open or power close, a warning chime will sound and the liftgate will reverse direction and return to the full open or full close position. If a second obstacle is detected, the liftgate motion will stop and the liftgate will enter manual mode. A pinch strip is mounted on each side of the liftgate. If an obstacle is detected by a pinch strip during power close, the liftgate will reverse direction and return to the full open position. Pre-driving checks and adjustments 3-27