2015 Nissan Rogue Owner's Manual - Page 26

● Head restraints/headrests should be adjusted properly as they may provide significant protection against injury in an accident. Always replace and adjust them properly if they have been removed for any reason. ● If the head restraints/headrests are removed for any reason, they should be securely stored to prevent them from causing injury to passengers or damage to the vehicle in case of sudden braking or an accident. ● When returning the seatbacks to the upright position, be certain they are completely secured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop. ● Properly secure all cargo to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury. LRS2386 LRS2404 For vehicles not equipped with 3rd row seating Folding the 2nd row bench seat To fold the 2nd row bench seat flat for maximum cargo hauling: 1. Make sure that the head restraints/headrests are lowered. For maximum cargo hauling, remove the center head restraint/headrest. To remove the head restraints/headrests, push and hold the lock knob while moving the head restraint/headrest in an upward direction. Store the head restraints/headrests properly so they are not loose in the vehicle. For vehicles equipped with 3rd row seating 2. Stow the 2nd row seat belts in the seat belt hooks found on the sides of the vehicle. 3. For vehicles equipped with 3rd row seating, 1 on the lower side of the pull the strap ᭺ outboard seats and lift up on the recline lever 2 located on the top of the outboard seats ᭺ to fold the seatbacks flat. For vehicles not equipped with 3rd row seating, lift up on the 2 on the top of the outboard recline lever ᭺ seats to fold the seatbacks flat. 4. To return the 2nd row bench seats to a seating position, push up on the seatback until it latches in place. Safety-Seats, seat belts and supplemental restraint system 1-7