2015 Nissan Rogue Owner's Manual - Page 56
2015 Nissan Rogue Manual
Page 56 highlights
7. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 3 through 6. 2nd row bench seat OUTBOARD SEATING POSITIONS 1. Remove the head restraint/headrest and store it in a secure place. Be sure to reinstall the head restraint/headrest when the child restraint is removed. For additional information, refer to "Head restraints/headrests" in this section for head restraint/headrest adjustment, removal and installation information. 1 over the 2. Position the top tether strap ᭺ seatback. LRS2406 1 ᭺ 2 ᭺ 2nd row bench seat Top tether strap Anchor point 3. Secure the tether strap to the tether anchor 2 on the bottom of the seatback point ᭺ behind the child restraint. 4. Tighten the tether strap according to the manufacturer's instructions to remove any slack. CENTER SEATING POSITION 1. Remove the head restraint/headrest and store it in a secure place. Be sure to reinstall the head restraint/headrest when the child restraint is removed. For additional information, refer to "Head restraints/headrests" in this section for head restraint/headrest adjustment, removal and installation information. Installing top tether strap The child restraint top tether strap must be used when installing the child restraint with the LATCH lower anchor attachments. First, secure the child restraint with the LATCH lower anchors (2nd row bench outboarding seating positions only). Safety-Seats, seat belts and supplemental restraint system 1-37