2008 Volvo V70 Owner's Manual - Page 248

The other two blocks can remain in the wheel well. After use The foam block and spare wheel must be replaced in the reverse order. Note the arrow on the upper foam block. It should point forward. 263 06 Maintenance and specifications Wheels and tires NOTE If the floor hatch is not completely closed, the private locking feature (see page 58) will not function. Changing a tire: 1. Apply the parking brake. 2. Put the gear selector in P. 3. Block the wheels that are on the ground with wooden blocks or large stones. 4. Remove the wheel cover (where applicable) using the lug wrench in the tool bag.With the vehicle still on the ground, use the lug wrench to loosen the wheel nuts 1/2-1 turns by exerting downward pressure. 5. Turn the nuts counterclockwise to loosen. 6. There are two jack attachment points on each side of the vehicle. Position the jack correctly in the attachment (see illustration above) and crank while simultaneously guiding the base of the jack to the ground. The base of the jack must be flat on a level, firm, non-slippery surface. Before raising the vehicle, check that the jack is still correctly