3Com 3CRWE50194 User Guide - Page 16

2 Home Wireless Gateway Table 1 Front Panel LEDs LED Power WAN Wireless LAN Description The Power indicator LED informs you when the gateway is on or off. If this light is on, the gateway is on; if it is not on, the gateway is off. During firmware upgrades and resets, this light will blink yellow (see "Update Firmware" on page 36). This light indicates the state of your Internet connection. When on, the WAN light indicates that the gateway is connected to the Internet through your external cable or DSL modem. When the WAN light is off, the gateway does not have an active connection to the Internet. This light displays the state of your wireless connection. If the light is blinking rapidly, a connection is established with an associated wireless client. If the light is blinking slowly, no wireless client is associated with the gateway. These three lights (one per port) display the state of your Ethernet connections. If the light is on, that port is connected to your Ethernet network. If the light is off, the port is not connected to your Ethernet network. Rear Panel The rear panel (Figure 6) of the gateway contains four ports, a reset switch, and a power adapter socket. Figure 6 Home Network Gateway - Rear Panel 6V _+ Reset Cable/DSL 1X 2X 3X 8