3Com 3CRWE50194 User Guide - Page 17
Table 2, Connector, Description
UPC - 662705387727
View all 3Com 3CRWE50194 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
2 Home Wireless Gateway Table 2 Rear Panel Connectors Connector Power Adapter Socket Reset Cable/DSL Ethernet Description The power adapter socket accepts the power adapter connector. To power up the gateway, simply insert the connector into the socket, and then plug the other end into a standard electrical wall socket. For easy identification, the power adapter socket is surrounded by a yellow border. Plug Adapters Three plug adapters are provided with your home wireless gateway to connect the power adapter to international power sockets. The light blue Reset button is used to reset the gateway. A "soft" reset keeps your gateway settings. To perform a "soft" reset, push the reset button once. A "hard" reset returns your gateway settings to their factory default state. To perform a "hard" reset, push and hold the reset button for 3 seconds. The Cable/DSL port (identified by a dark blue border) accepts an RJ-45 connector to connect your gateway to the Internet. See "External Cable and DSL Modem Connections" on page 12 for more details. Three ports are available to connect to Ethernet hubs or to connect other Ethernet-compatible computers to the gateway. These are dual-speed (10/100 Mbps) ports that accept an RJ-45 connector. For easy identification, the Ethernet ports are surrounded by a green border. See "Setting Up Computers for Ethernet Networking" on page 16 for more details. 9