3Com 3CRWE50194 User Guide - Page 21
Connecting the Wireless Gateway to Your Network, Cable/DSL port on the rear panel of the gateway. - manual
UPC - 662705387727
View all 3Com 3CRWE50194 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
3 Basic Installation Figure 7 Cable or DSL Modem Connected to the Gateway 6V _+ Cable/DSL Reset 3X 2X 1X Ethernet cable Internet 1X Cable/DSL Reset Cable or DSL modem _ Cable/DSL port 1 Insert one end of an Ethernet (RJ-45 Category 5) cable into the Cable/DSL port on the rear panel of the gateway. 2 Insert the other end of the cable into the RJ-45 port on your cable or DSL modem This port would normally be used to make an Ethernet connection to your computer or home network. Refer to the manuals that came with your modem for more details. 3 Connect the cable or DSL modem to the Internet. Connect the modem to the cable or DSL connector. Refer to the documentation that came with your modem for more details. 4 Proceed to "Connecting the Wireless Gateway to Your Network". Connecting the Wireless Gateway to Your Network The next step for setting up your gateway is to configure one or more computers for connection to your gateway through wireless or wired (Ethernet) connections. 13