Apple M8840LL/A Setup Guide - Page 14
This equipment is intended to be electrically grounded. Your Macintosh is
UPC - 718908440841
View all Apple M8840LL/A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2 Plug one end of the computer's power cord into the recessed power socket marked with the symbol (≤) on the back of the computer. Warning To prevent electrical shock, fire, or damage to the computer, the power cord must fit completely over the prongs inside the socket. Power cord socket Power cord plug 3 Plug the other end of the power cord into a three-hole grounded outlet or power strip. The plug grounds the computer and protects it from electrical damage while you set up. Important Make sure the computer is located near an outlet or power strip and that you can easily reach the plug to disconnect the computer in an emergency. The only way to completely disconnect power from the computer is by unplugging one end of the power cord from the outlet or power strip or from the back of the computer. Warning This equipment is intended to be electrically grounded. Your Macintosh is equipped with a three-wire grounding plug-a plug that has a third (grounding) pin. This plug will fit only a grounded AC outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact a licensed electrician to replace the outlet with a properly grounded outlet. Do not defeat the purpose of the grounding plug! 14 Chapter 1