Apple M8840LL/A Setup Guide - Page 28

accommodate, see the electronic documentation that came with the computer.

Page 28 highlights

Note: The maximum number of drives that can function in the lower drive bays is two ATA drives or three SCSI drives. For technical information about the power requirements for devices the computer can accommodate, see the electronic documentation that came with the computer. CD-ROM/DVD-ROM/DVD-RAM drive bay Zip drive bay (Zip drive is optional) Drive position 3: Accommodates two 3.5" ATA hard disk drives (maximum 1" high), or a single SCSI drive (maximum 1.6" high). Drive position 2: Accommodates a 3.5" SCSI hard disk drive (maximum 1.6" high). Drive position 1: Accommodates a 3.5" SCSI hard disk drive (maximum 1.6" high). The following table shows the type, number, and height of drives that fit on the carrier in each drive bay. (A drive already occupies at least one of these positions.) Position 1 (front) SCSI: One 1.0-inch (25.4 mm) or 1.6-inch (40.6 mm) drive Position 2 (middle) SCSI: One 1.0-inch (25.4 mm) or 1.6-inch (40.6 mm) drive Position 3 (rear) SCSI: One 1.0-inch (25.4 mm) drive; or one 1.6-inch (40.6 mm) drive ATA: One or two 1.0-inch (25.4 mm) drives 28 Chapter 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62

28
Chapter
2
Note:
The maximum number of drives that can function in the lower drive bays is two ATA
drives or three SCSI drives.
For technical information about the power requirements for devices the computer can
accommodate, see the electronic documentation that came with the computer.
The following table shows the type, number, and height of drives that fit on the carrier in
each drive bay. (A drive already occupies at least one of these positions.)
CD-ROM/DVD-ROM/DVD-RAM drive bay
Zip drive bay (Zip drive is optional)
Drive position 3: Accommodates
two 3.5" ATA hard disk drives
(maximum 1" high), or a single
SCSI drive (maximum 1.6" high).
Drive position 2: Accommodates a
3.5" SCSI hard disk drive
(maximum 1.6" high).
Drive position 1:
Accommodates a 3.5" SCSI
hard disk drive (maximum 1.6" high).
Position 1 (front)
Position 2 (middle)
Position 3 (rear)
SCSI:
One 1.0-inch (25.4
mm) or 1.6-inch (40.6
mm) drive
SCSI:
One 1.0-inch (25.4
mm) or 1.6-inch (40.6
mm) drive
SCSI:
One 1.0-inch (25.4 mm) drive; or
one 1.6-inch (40.6 mm) drive
ATA:
One or two 1.0-inch (25.4 mm)
drives