Apple M8840LL/A Setup Guide - Page 39
Unplug the power cord bundle from the main logic board and the ribbon cable from
UPC - 718908440841
View all Apple M8840LL/A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Installing an Internal Storage Device 1 Unplug the power cord bundle from the main logic board and the ribbon cable from the drive. If you're working with SCSI drives, disconnect the power cord bundle from the main logic board. Unplug the power cord bundle from the main logic board. Unlock the power cord bundle plug by pressing the small catch located on the side of the plug. (Side view) Unplug the ribbon cable from the hard disk drive. Working Inside the Computer 39
Working Inside the Computer
39
Installing an Internal Storage Device
1
Unplug the power cord bundle from the main logic board and the ribbon cable from the
drive.
If you’re working with SCSI drives, disconnect the power cord bundle from the main logic
board.
Unlock the power cord bundle
plug by pressing the small catch
located on the side of the plug.
Unplug the power cord bundle
from the main logic board.
Unplug the ribbon cable
from the hard disk drive.
(Side view)