Apple M8840LL/A Setup Guide - Page 33
in Setting Up.
UPC - 718908440841
View all Apple M8840LL/A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
4 If you have never plugged in your computer: m Make sure the voltage switch is set correctly for the voltage system to which you will be connecting the computer. (See the table "Voltage Switch Settings for Different Locations," in Chapter 1, "Setting Up.") m Connect the computer's power cord and plug it in. 5 Touch the metal PCI access covers on the back of the computer. This helps protect the computer from damage caused by electrostatic discharge. Touch the metal portion of the PCI port access covers. Important Always do this before you touch any parts, or install any components, inside the computer. To avoid generating static electricity, do not walk around the room until you have completed the installation of the expansion card, memory, or internal storage device and closed the computer. 6 Unplug the power cord. Working Inside the Computer 33