Apple M8840LL/A Setup Guide - Page 44
If you're installing a 1.0-inch or 1.6-inch SCSI drive to the carrier in drive position 1 or
UPC - 718908440841
View all Apple M8840LL/A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
m If you're installing a 1.0-inch or 1.6-inch SCSI drive to the carrier in drive position 1 or 2, attach the underside of the drive to the carrier (as shown below). Attach additional SCSI drives (1" or 1.6" high) to the two flat drive carriers by screwing them into position from the bottom. Position the hard disk drive on the drive carrier so that the ribbon cable connector and the power cord connector are accessible. Screw the drive into position with the four screws supplied with the drive. 44 Chapter 2
44
Chapter
2
m
If you’re installing a 1.0-inch or 1.6-inch SCSI drive to the carrier in drive position 1 or
2,
attach the underside of the drive to the carrier (as shown below).
Attach additional SCSI drives (1" or 1.6" high) to the two flat drive
carriers by screwing them into position from the bottom.
Position the hard disk drive on the drive carrier so that the ribbon cable
connector and the power cord connector are accessible. Screw the drive
into position with the four screws supplied with the drive.