Asus RS700-E10-RS12U User Manual - Page 186
CPU C State Control, Register Access Low Latency Mode [Disabled]
View all Asus RS700-E10-RS12U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
Scalability [Disable] Allows you to enable or disable Core Performance to Frequency Scalability Based Optimizations in the CPU. Configuration options: [Disable] [Enable] Native ASPM [Disabled] [Auto] BIOS Controlled ASPM [Enabled] OS Controlled ASPM [Disabled] ASPM Off CPU C State Control Enable Monitor MWAIT [Enable] Allows you to enable or disable Monitor and MWAIT instructions. Configuration options: [Disable] [Enable] CPU C1 auto demotion [Enable] Allows CPU to automatically demote to C1. Takes effect after reboot. Configuration options: [Disable] [Enable] CPU C1 auto undemotion [Enable] Allows CPU to automatically undemote from C1. Takes effect after reboot. Configuration options: [Disable] [Enable] CPU C6 Report [Auto] Allows you to enable or disable CPU C6 (ACPI C3) report to OS. Configuration options: [Disable] [Enable] [Auto] Enhanced Halt State (C1E) [Enable] Core C1E auto promotion Control. Takes effect after reboot. Configuration options: [Disable] [Enable] OS ACPI Cx [ACPI C2] Allows you to select to report CC3/CC6 to OS ACPI C2 or ACPI C3. Configuration options: [ACPI C2] [ACPI C3] Package C State Control Package C State [Auto] Allows you to select Package C State limit. Configuration options: [C0/C1 state] [C2 state] [C6(non Retention state] [Auto] Register Access Low Latency Mode [Disabled] Enable low latency mode for register accesses. Configuration options: [Disabled] [Enabled] Enabling this mode will prevent PkgC6 as register access fabric is prevented from going to idle. 5-54 Chapter 5: BIOS Setup