Asus RS700-E10-RS12U User Manual - Page 81
x NVMe storage device configuration and cabling, screwdriver
View all Asus RS700-E10-RS12U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
2.9.4 12 x NVMe storage device configuration and cabling • The illustrations in this section are for reference only and may vary between models. • You may still support one of the following configurations with this configuration, for more information please refer to the following sections: - SATA support for bays 1 to 12: 12 x SATA storage device configuration and cabling - SAS support for bays 1 to 8 and SATA support for bays 9 to 12: 8 x SAS and 4 x SATA storage device configuration and cabling Backplane connector SLMPCIE1 SLMPCIE2 SLMPCIE3 SLMPCIE4 SLMPCIE5 SLMPCIE6 Cable Slimline PCIe to Slimline PCIe Slimline PCIe to Slimline PCIe Slimline PCIe to Slimline PCIe Slimline PCIe to Slimline PCIe Slimline PCIe to Slimline PCIe Slimline PCIe to Slimline PCIe Connect to SLMPCIE3 on motherboard SLMPCIE4 on motherboard SLMPCIE2 on motherboard SLMPCIE9 on motherboard SLMPCIE10 on motherboard SLMPCIE6 on motherboard 1. Install the storage devices into the supported bays. Refer to section Storage Devices for details on how to install storage devices. NVMe NVMe NVMe NVMe NVMe NVMe NVMe NVMe NVMe NVMe NVMe NVMe 2. Remove the six (6) screws of the rack screw on both sides of the chassis with a Phillips screwdriver (A), then remove the rack screws on both sides of the chassis (B). ASUS RS700-E10 Series 2-55