Asus RS700-E10-RS12U User Manual - Page 55
Installing an expansion card to the butterfly riser card bracket
View all Asus RS700-E10-RS12U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
2.6.3 Installing an expansion card to the butterfly riser card bracket The pre-installed butterfly riser card bracket on the PCIE2 slot supports Low Profile (LP), Half-Length (HL) PCIE x16 expansion cards. To install a PCIE x16 (Gen4 x16 link) expansion card on the butterfly riser card bracket: 1. Loosen the thumbscrew (A) securing the butterfly riser card bracket to the chassis, then lift the butterfly riser out of the chassis by firmly holding it by the tab and pulling it upwards to detach it from the PCIE x16 slot on the motherboard. ASUS RS700-E10 Series 2-29
2-29
ASUS RS700-E10 Series
To install a PCIE x16 (Gen4 x16 link) expansion card on the butterfly riser card bracket:
1.
Loosen the thumbscrew (A) securing the butterfly riser card bracket to the chassis,
then lift the butterfly riser out of the chassis by firmly holding it by the tab and pulling it
upwards to detach it from the PCIE x16 slot on the motherboard.
2.6.3
Installing an expansion card to the butterfly riser card
bracket
The pre-installed butterfly riser card bracket on the PCIE2 slot supports Low Profile (LP),
Half-Length (HL) PCIE x16 expansion cards.