Asus VIA User Manual - Page 40
ASUS A7V User's Manual, ATX Power Supply Connector, pin block ATXPWR, Power Supply Thermal Sensor
View all Asus VIA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
3. H/W SETUP Connectors 01 01 01 01 01 01 3. HARDWARE SETUP 19) ATX Power Supply Connector (20-pin block ATXPWR) This connector connects to an ATX power supply. The plug from the power supply will only insert in one orientation because of the different hole sizes. Find the proper orientation and push down firmly making sure that the pins are aligned. IMPORTANT: Make sure that your ATX power supply can supply at least 10mA on the +5-volt standby lead (+5VSB). You may experience difficulty in powering ON your system if your power supply cannot support the load. For WakeOn-LAN support, your ATX power supply must supply at least 720mA +5VSB. A7V A7V ATX Power Connector +12.0Volts +5V Standby Power Good Ground +5.0 Volts Ground +5.0 Volts Ground +3.3 Volts +3.3 Volts +5.0 Volts +5.0 Volts -5.0 Volts Ground Ground Ground Power Supply On Ground -12.0Volts +3.3Volts ATX 20) Power Supply Thermal Sensor Connector (2-pin block JTPWR) If you have a power supply with thermal monitoring, connect its thermal sensor cable to this connector. JTPWR A7V A7V Power Supply Thermal Sensor Connector 40 ASUS A7V User's Manual