Asus VIA User Manual - Page 41
ASUS A7V User's Manual, IDE Activity LED 2-pin IDELED
View all Asus VIA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
3. HARDWARE SETUP 21) IDE Activity LED (2-pin IDELED) This connector supplies power to the cabinet's IDE activity LED. Read and write activity by devices connected to the Primary/Secondary IDE and Primary/ Secondary ATA100 connectors will cause the LED to light up. 01 01 01 01 01 01 A7V A7V IDE Activity LED TIP: If the case-mounted LED does not light, try reversing the 2-pin plug. IDELED NOTE: The LED will not light up during read and write activity by devices connected to the Primary or Secondary IDE connectors of motherboards with PCB versions earlier than Rev. 1.01.P (for example, Rev. 1.01.). To check your PCB version, see the area between PCI4 and PCI5 and look for the marking that starts with "REV." PCI4 PCI5 AMR The following PANEL illustration is used for items 23-28 (next page). Power LED Speaker Connector 3. H/W SETUP Connectors +5 V PLED +5V Ground Ground Speaker +5 V TB_LED ExtSMI# Ground PWR Ground Reset Ground A7V A7V System Panel Connectors Message LED SMI Lead Reset SW ATX Power Switch* * Requires an ATX power supply. ASUS A7V User's Manual 41