Binatone Concept Combo 3525 User Manual - Page 43

7.4 Base Settings 7.4.1 De-register a Handset This operation should only be necessary if one of your handsets becomes faulty or lost and needs to be replaced. You will need to enter the 4-digit System PIN (Default PIN is 0000) in order to de-register a handset from the base station. A de-registered handset will have the antenna icon flashing and "REGISTER" on the display. Note: You cannot de-register the handset that you are currently using. 1. Press and to select BS SETTINGS. 2. Press to show DELETE HS. 3. Press and the display shows "PIN? ------". 4. Enter the 4-digit system PIN (default 0000). 5. Press and the first handset number is displayed. 6. Press to scroll through the list of registered handsets and select the number of the handset you want to de-register. 7. Press to confirm, and the chosen handset will be de-registered. 7.4.2 Change the dial mode You should normally leave the dialling mode at its default setting of TONE (also called DTMF) unless the phone is connected to an old exchange that only recognises PULSE dialling. Note: If PULSE dialling is set, you can press the * key to switch to TONE dialling for the rest of that call. 1. Press and to select BS SETTINGS. 2. Press and to select DIAL MODE. 3. Press and to select TONE or PULSE (The current setting is indicated by an asterisk to the right). 4. Press to confirm. 7.4.3 Change the Flash (Recall) Time You may need to change the recall (flash) time if your phone is connected to a PBX. The recall time options are SHORT (the default value of 100ms), MEDIUM (300ms) or LONG (600ms). 1. Press and to select BS SETTINGS. 2. Press and to select FLASH TIME. 3. Press and to select your desired flash time (SHORT, MEDIUM, LONG, with the current setting indicated by an asterisk to the right). 4. Press to confirm. 41