Binatone Concept Combo 3525 User Manual - Page 47

7.9 Set the Recall (Flash) Time You may need to change the recall (flash) time if your phone is connected to a PBX. The recall time options are SHORT (the default value of 100ms), MEDIUM (300ms) or LONG (600ms). In Idle: 1. Press and to select SETTINGS. 2. Press and to select FLASH TIME. 3. Press and to select the desired flash time, from SHORT, MEDIUM and LONG. 4. Press to confirm. 7.10 Set the Key Tone The Key Tone is a confirmation beep when you press any key. It is set on by default, but can be turned off, if desired. In Idle: 1. Press and to select SETTINGS. 2. Press and to select KEY TONE. 3. Press and to select ON or OFF. 4. Press to confirm. 7.11 Set the Base Language In Idle: 1. Press and to select LANGUAGE. 2. Press and to select your desired language. 3. Press to confirm. 7.12 Change the System PIN A 4-digit system PIN code is used for changing the system settings of the base station, and is used to protect your phone from unauthorised use. The default system PIN code is 0000. 1. Press and to select SETTINGS. 2. Press and to select CHANGE PIN. 3. Press and display will show "PIN?", enter the 4-digit PIN (default setting is 0000) and press . 4. The display will show "NEW PIN", enter the new PIN and press . 5. The display will show "REPEAT", enter the new PIN again, and press to confirm. Note: If the incorrect PIN is entered or the new PIN is not entered twice the same, an error tone will be emitted and it will return to the previous menu. If this takes a short time, press to return to the menu immediately. 45