Binatone Concept Combo 3525 User Manual - Page 57

9.5.9.2 Activate or Deactivate the Remote Access 1. Press and to select ANS. MACHINE. 2. Press and to select TAM SETTINGS. 3. Press and to select REMOTE ACC. 4. Press and to select ON or OFF to turn the remote access on or off respectively. 5. Press to confirm. 9.5.9.3 Access Your Answering Machine Remotely You can ring your phone from another tone-dialling phone to switch the answering machine on or off, and/or listen to your messages remotely. 1. Place a call from a tone-dialling phone to your phone. 2. When the answering machine answers the call and starts playing the OGM, press the key. The OGM will stop playing 3. Enter the 4-digit Remote Access PIN (default PIN is 0000). You will hear a single beep if the 4 digits are accepted, and then will need to press 5 to start playing any messages. Note: The * may be entered during or after the OGM, and the 4-digit PIN should be follow without any delays. Note: If the 4-digit Remote Access PIN is not accepted, you will hear a multiple beep, and if it is entered incorrectly three times consecutively, the line will be released automatically. 4. Press the following keys to carry out your desired function. .H\V :KLOHPHVVDJHLVQRWSOD\LQJ    3OD\WKHPHVVDJH )XQFWLRQV While message is playing Delete the current message playing Repeat playing the current message from the beginning. Press twice to skip backward to play the previous message. 6WRSWKHFXUUHQWPHVVDJHSOD\EDFN   Turn on the answering machine 8  Turn off the answering machine 6NLSWRSOD\WKHQH[WPHVVDJH Stop the current message palyback Note: If your answering machine is switched off, the phone will enter into the remote access mode after 14 rings. You can then enter the key and the 4-digit remote access PIN (Default Remote Access PIN is 0000) to activate the remote access feature. 55