Binatone Concept Combo 3525 User Manual - Page 64
CC3525 system - user guide
View all Binatone Concept Combo 3525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
1. Press and to select ANS. MACHINE. 2. Press and to select TAM SETTING. 3. Press and to select REMOTE ACC. 4. Press and to select ON or OFF to turn on or off the remote access respectively. 5. Press to confirm. 9.12.5 Change the Compression Rate Three different compression rates (HIGH, MEDIUM and LOW) are provided for you to select different quality levels of recording incoming message. The lower the compression rate, the higher the recording quality level attained, but the shorter the total recording time available. (LOW = 7 minutes, MEDIUM = 10 minutes, HIGH = 15 minutes approximately.) 1. Press and to select ANS. MACHINE. 2. Press and to select TAM SETTING. 3. Press and to select COMPRESSION. 4. Press and to select your desired compression rate. 5. Press to confirm. CC3525 system Remote operation 1 Using a tone-dialling phone, dial your home number 2 While your outgoing message is playing, press 3 Key in your remote security code The default code is 0000. For details of how to set a new code, see the User Guide 9.12.6 on page 63. Note: The key can be entered during or after the OGM and the 4-digit PIN should follow without any delays. If the 4-digit Remote Access PIN is entered incorrectly three times consecutively, the line will be released automatically. 4 You can also use the codes on the other side of this card Note: If your answering machine is switched off, the phone will enter into the remote access mode after 14 rings. You can then enter the 4-digit remote access PIN (Default Remote Access PIN is 0000) to activate the remote access feature. 62