Binatone Concept Combo 3525 User Manual - Page 49

8 REGISTRATION IMPORTANT: When you purchase your phone system, all cordless handsets are already registered to your base, so you do not need to register them. Handset registration is only necessary when you buy extra cordless or if a cordless has become faulty. You can register additional cordless to have up to 5 handsets per base unit, with each handset's number (1 to 5) shown on its display. A cordless handset can be registered to only one base at a time. To check whether a handset is registered, make sure mains power to the base unit is switched on and the handset is within range. The handset's display should show its number and the should be steadily on. If the display shows "REGISTER ", you need to register the handset again using the following process: 1. On the base station, press and to show REGISTRATION, and then press to put the base station into registration mode. The base display will show "PLEASE WAIT" and the base will stay in registration mode for about 2 minute, so the following handset sequence must be completed within this time. 2. Press and to select REGISTRATION. 3. Press to display PIN?----. 4. Enter the 4-digit system PIN (default is 0000). 5. Press to confirm, and the display will show PLEASE WAIT flashing. If the handset registration is successful, the display will change to standby mode with the new handset number and the will stop flashing. The handset will automatically be allocated the next available handset number. If the handset registration is unsuccessful, the will still flash. 47