Brother International ADS-3000N Network Users Guide - Page 34
Downloads, enter the Network Key you wrote down in the first step.
View all Brother International ADS-3000N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Configuring Your Machine for a Wireless Network (ADS-2800W / ADS-3600W) 5 Do one of the following: • If you are using an authentication and encryption method that requires a Network Key, enter the Network Key you wrote down in the first step. When you have entered all the characters, press OK, and then press Yes to apply your settings. • If your authentication method is Open System and your encryption mode is None, go to the next step. • If your WLAN access point/router supports WPS, The selected access point/router supports WPS. Use WPS? appears. To connect your machine using the automatic wireless mode, 3 press Yes. (If you selected No (Manual), enter the Network Key you wrote down in the first step.) When Start WPS on your wireless access point/router, then press [Next]. appears, press the WPS button on your WLAN access point/router, and then press Next. 6 The machine attempts to connect to the wireless device you selected. If your wireless device is connected successfully, the machine's LCD displays Connected. You have completed the wireless network setup. To install the drivers and software necessary for operating your machine, insert the installation DVD-ROM into your computer's drive or go to your model's Downloads page on the Brother Solutions Center at support.brother.com 30