Brother International ADS-3000N Network Users Guide - Page 99
I want to check that my network devices are working properly., Question, Interface, Solution, Network
View all Brother International ADS-3000N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Troubleshooting I want to check that my network devices are working properly. 7 Question Interface Solution Is your Brother machine, access point/router or network hub turned on? wired/ Make sure you have confirmed all instructions in Make sure you have wireless checked the following: on page 87. Where can I find my Brother wired/ machine's network settings, wireless such as IP address? For Web Based Management 1 Start Web Based Management and access your Brother machine (see step 1 on page 39). 2 When the Web Based Management screen appears, click the Network tab, and then click Network Status in the left navigation bar. For Control panel (ADS-2800W / ADS-3600W) Check the settings in Network from the control panel on your machine. How can I check the link wired/ For Web Based Management status of my Brother machine? wireless 1 Start Web Based Management and access your Brother machine (see step 1 on page 39). 7 2 When the Web Based Management screen appears, click the Network tab, and then click Network Status in the left navigation bar. For Control panel (ADS-2800W / ADS-3600W) (Wired network) Check that Status in Wired Status is Active XXXX-XX (where XXXX-XX is your selected Ethernet interface). To check the network status: press > Network > Wired LAN > Wired Status > Status. If the LCD message shows Inactive or Wired OFF, ask your network administrator whether your IP address is valid or not. (Wireless network) Check the Status in WLAN Status is not Connection Failed. See How to Check the WLAN Status (ADS-2800W / ADS-3600W) on page 9. If the LCD message displays Connection Failed, ask your network administrator whether your IP address is valid or not. 95