Brother International ADS-3000N Network Users Guide - Page 9
Uncon d, STATIC, Boot Method, IP Address, Subnet Mask, Gateway
View all Brother International ADS-3000N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Changing Your Network Settings 3 Double-click your Brother machine. 2 NOTE • If the scan server is set to its factory settings (and you do not use a DHCP/BOOTP/RARP server), the device appears as Unconfigured in the BRAdmin Light utility window. • You can display your machine's MAC Address (Ethernet Address) and Node Name using the machine's LCD (ADS-2800W / ADS-3600W). To find the MAC Address, press > Network > WLAN > MAC Address. To find the Node Name, press > Network > WLAN > TCP/IP > Node Name. 4 Select STATIC from the Boot Method list. Type the IP Address, Subnet Mask and Gateway (if needed) for your machine. 5 Click OK. 6 Your Brother machine appears in the device list. If it does not, check your IP Address in step 4. 5
Changing Your Network Settings
5
2
3
Double-click your Brother machine.
NOTE
•
If the scan server is set to its factory settings (and you do not use a DHCP/BOOTP/RARP server),
the device appears as
Unconfigured
in the BRAdmin Light utility window.
•
You can display your machine’s MAC Address (Ethernet Address) and Node Name using the
machine’s LCD (ADS-2800W / ADS-3600W).
To find the MAC Address, press
>
Network
>
WLAN
>
MAC Address
.
To find the Node Name, press
>
Network
>
WLAN
>
TCP/IP
>
Node Name
.
4
Select
STATIC
from the
Boot Method
list. Type the
IP Address
,
Subnet Mask
and
Gateway
(if needed)
for your machine.
5
Click
OK
.
6
Your Brother machine appears in the device list. If it does not, check your IP Address in step
4
.