Brother International EF4-B561 Service Manual - Page 28
COVER, Procedures
View all Brother International EF4-B561 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
a COVER r 4r IRO Parallel about 0.5 mm O e 0 Procedures Q'ty of screw 1 Temporarily fasten front cover supporter 0 on machine body. 2 2 Temporarily fasten front cover 0 on oil reservoir. (Close front cover) 2 3 Temporarily fasten front cover guide 0 parallel to machine body. 2 0, * Make an adjustment so that, when front cover 0 comes off front cover guide it can be put back in place as before. . The following items from 0 to 0 must be made while checking. 4 Adjust front cover 0 so it is parallel to machine body and has a clearance about 0.5 mm. Overlock Stitch Safety Stitch 4s. O -- About 0.5 mm 5 Make an adjustment so that, when upper knife 0 is down lowest, there is a clearance of about 0.5mm between front cover 0 and upper knife 0. 0.5 - I mm About 0.5 mm Make an adjustment so that front cover will be between upper knife 0 and double chain stitch looper and their clearance will be as shown above. (T) Ry OO 6 Adjust the clearance between front cover Q and front cover guide 0 to 0.5 to 1 mm. 7 Front cover is held securely by front cover supporter 410 and stopper spring 0. - 26 -