Brother International EF4-B561 Service Manual - Page 36
STITCHING, Overlock, Stitch, CHECK, POINT, ADJUSTMENT, Blunt, Flaws
View all Brother International EF4-B561 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Da SKIP STITCHING (Overlock Stitch) CHECK POINT ADJUSTMENT PAGE 1 Wrong threading. Refer to threading diagram. 2 Excessive pressure of tension disc. Adjust to proper pressure. 28 In case skipping between over looper and needle. 1 Wrong position of looper thread take-up. 2 Little movement into the left of over looper. 1 3 Large clearance between needle and over looper. ----. Adjust to proper position. 24 Adjust the position of over looper for proper 19 movement. Adjust over looper and under looper for proper clearance between needle and over looper. 18 19 4 Incorrect height of needle bar. --+ Adjust to proper height. 17 * In case of skipping between over looper and under looper. 1 Large clearance between under looper and over looper. 1 2 Top of over looper blunt or bent. Adjust to proper clearance. 20 Chnange it for a new one or smooth with 19 oil stone or buff. 0-a Blunt * In case of skipping between under looper and needle. 1 Large clearance between under looper and needle. 1 2 Top of under looper blunt or bent. Adjust to proper clearance. 18 Change it for a new one or smooth with oil 18 stone or buff. • Blunt Flaws 3 Incorrect height of needle bar. 4 Wrong timing of under looper. Adjust to proper height. 17 Adjust to proper timing. 18 - 34 -