Brother International EF4-B561 Service Manual - Page 38
Needle, Breakage, Check, Point, Adjustment, Improper, Thread, Tension, Wrong, Chaining, Overlock,
View all Brother International EF4-B561 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
A NEEDLE BREAKAGE CHECK POINT I Poor thread quality. 1 2 Needle size too small. 1 3 Needle is not center of needle plate slot. 1 4 Needle and looper out of proper relation. 5 Wrong adjustment of needle guard. ADJUSTMENT PAGE Use thread of good quality. Change it for more large one. Adjust to proper position. Adjust the position of needle guard and looper properly. 17 • 18 19 Adjust to proper position for needle guard. 19 • 21 IMPROPER THREAD TENSION CHECK POINT 1 Poor thread quality. 1 2 Needle size too small. 1 3 Too weak pressure of tension disc. 4 4 Wrong position of thread take-up. ADJUSTMENT --' Use thread of good quality. -.. Change it for more large one. -•-• Adjust to proper pressure. -. Adjust to proper position. PAGE 28 24 • 25 WRONG CHAINING-OFF (Overlock Stitch) CHECK POINT 1 Wrong threading. 4 2 Excessive pressure of tension disc. 1 3 Too weak pressure of tension disc. 1 4 Wrong position of looper thead take-up. 1 5 Wrong position of needle thread take-up. 1 6 Wrong installment of chain feed dog. 7 Needle plate has flaws. ADJUSTMENT -----* Refer to thread diagram. -,i• Adjust to proper pressure ---. Adjust to proper pressure. ----. Adjust to proper position. ----.• Adjust to proper position. --. Adjust to proper position. ----.• Change it for a new one, or smooth with stone oil and buff. PAGE 28 28 24 16 24 Flaws 8 Wrong timing between needle and looper. ----. Adjust to proper timing. 18 • 19 lE - 36 -