Brother International Innov-is 1250D Operation Manual - Page 123

Stitch Name Pattern Application 46 Hemstitching 47 Heirloom stitching, etc. 35 Ladder stitch Rick-rack 36 stitch Decorative 37 stitch Serpentine 38 stitch Decorative stitching Fagoting Stitch Width [mm (inch)] Auto Manual Stitch Length [mm (inch)] Auto Manual Presser Foot 6.0 1.5-7.0 1.6 1.0-4.0 (15/64) (1/16-1/4) (1/16) (1/16-3/16) N 5.0 1.5-7.0 1.6 1.0-4.0 (3/16) (1/16-1/4) (1/16) (1/16-3/16) 4.0 0.0-7.0 3.0 2.0-4.0 (3/16) (0-1/4) (1/8) (1/16-3/16) 4.0 0.0-7.0 2.5 1.0-4.0 (3/16) (0-1/4) (3/32) (1/16-3/16) J 5.5 0.0-7.0 1.6 1.0-4.0 (7/32) (0-1/4) (1/16) (1/16-3/16) 5.0 1.5-7.0 1.0 0.2-4.0 (3/16) (1/16-1/4) (1/16) (1/64-3/16) N 3 Select stitch 32 or 33 . d Stitching across an open seam is called "fagoting". It is used on blouses and children's clothing. This stitch is more decorative when thicker thread is used. Use an iron to fold the two pieces of fabric a along their seams. Baste the two pieces of fabric, separated by b about 4 mm (3/16 inch), onto thin paper or a sheet of water-soluble stabilizer. If you draw a line down the middle of the thin paper or water-soluble stabilizer, sewing is easier. 3 1 • For details, refer to "Selecting stitching" (page 51). Set the stitch width to 7.0 mm (1/4 inch). e • For details, refer to "Adjusting the stitch width" (page 58). Sew with the center of the presser foot aligned f along the center of the two pieces of fabric. 2 a Thin paper or water soluble stabilizer b Basting stitching c 4 mm (3/16 inch) Attach zigzag foot "J". c J • For details, refer to "Replacing the presser foot" (page 44). After sewing is finished, remove the paper. g Decorative Stitching 121