Brother International Innov-is 1250D Operation Manual - Page 169

Embroidering a pattern † Example: Embroidery thread number selected Embroidery patterns are embroidered with a change of thread after each color. Prepare embroidery thread of the color shown a on the screen. c a b d e a Embroidery frames that can be used for embroidering b Current color step/Number of colors in design c Current name of color d Current color part e Next color part Set the embroidery thread, and thread the b needle. 4 • Refer to "Threading the upper thread" (page • The thread color number set displayed for the 32) and "Threading the needle" (page 34). thread colors can be changed. Press (Settings key), and then change the setting in the settings screen. For details, refer to "LCD (liquid crystal display) operation" (page 160). Note z Before using the needle threader, be sure to lower the presser foot. Pass the thread through the embroidery foot c hole, and hold it lightly in your left hand. Give the thread a little slack. CAUTION ● If the thread is pulled too tight, the needle may break or bend. ● Do not let hands or objects hit the carriage while sewing. The pattern may misalign. Embroidering 167