Brother International Innov-is 1250D Operation Manual - Page 157
Tighten the adjustment screw while removing
View all Brother International Innov-is 1250D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Tighten the adjustment screw by hand just d enough to secure the fabric. Tighten the adjustment screw while removing g any slack in the fabric by hand. The goal is to have a drum-like sound when the stretched fabric is struck lightly. Gently remove the fabric from the frame e without loosening the adjustment screw. Memo z This precautionary step will help reduce pattern distortion while embroidering. ■ Using embroidery sheets If the embroidery sheet attached to the embroidery frame is used, the embroidery can be sewn in exactly the right position on the fabric. 4 Press the inner frame in from the top of the f fabric again, lining up on the inner frame and on outer frame. Make a mark with a chalk pen at the center of a the position for the pattern to be embroidered. 1 3 12 54 a Outer frame b Inner frame c Fabric (right side) d Stabilizer material e Ledge of outer frame • Press down firmly until the inner frame is securely pressed against the ledge of the outer frame. 2 a Embroidery pattern b Mark Preparing the Fabric 155