Brother International Innov-is 1250D Operation Manual - Page 39
attach zigzag foot J. If bunched stitches
View all Brother International Innov-is 1250D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Thread the upper thread for the right side in the g same way that the upper thread for the left side was threaded. Turn on the sewing machine and select a stitch. j • For stitch selection see "Selecting stitching" (page 51). • See "Stitch Setting Chart" (page 70) for stitches that use a twin needle. 1 a Thread guide cover • For details, refer to steps h through j of "Threading the upper thread" (page 33). Without passing the thread through the needle h bar thread guide, manually thread the right needle. Pass the thread through the eye of the needle from the front. • The needle threader cannot be used with the twin needle. If the needle threader is used with the twin needle, the sewing machine may be damaged. Attach zigzag foot "J". i • For details on changing the presser foot, refer to "Replacing the Presser Foot" (page 44). CAUTION ● When using the twin needle, be sure to attach zigzag foot "J". If bunched stitches occur, use presser foot "N" or attach stabilizer material. Note z When using the pintuck foot (sold separately) to sew straight pintucks with the twin needle, select the stitch with the center needle position. CAUTION ● When using the twin needle, be sure to select an appropriate stitch, otherwise the needle may break or the machine may be damaged. ● After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. Press . k X The screen for setting the twin needle appears. Upper Threading 37