Brother International Innov-is 1250D Operation Manual - Page 151
Removing the embroidery foot
View all Brother International Innov-is 1250D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Removing the embroidery foot Press ("Needle Position" button) once or a twice to raise the needle. While pressing in the lever at the back of the d embroidery foot with your finger, loosen the presser foot holder screw, and then remove embroidery foot "Q". Turn the screwdriver toward the back. a "Needle Position" button Turn off the sewing machine. b Attach the presser foot holder. e • For details, refer to "Attaching the presser foot holder" (page 46). CAUTION 4 ● Before removing the embroidery foot, be sure to turn off the sewing machine. Otherwise, injuries may occur if one of the operation buttons is accidentally pressed and the machine starts sewing. Raise the presser foot lever. c a Presser foot lever X The presser foot is raised. Attaching the Embroidery Foot 149