Brother International Innov-is 1250D Operation Manual - Page 190

APPENDIX Raise the presser foot using the presser foot d lever. Pass the thread under the thread guide plate, g and then pull it up. a Presser foot lever • If the presser foot is not raised, the sewing machine cannot be threaded correctly. Press ("Needle Position" button) once or e twice to raise the needle. a Thread guide plate While using your right hand to lightly hold the h thread passed under the thread guide plate, pass the thread through the thread path in the order shown below. 1 a "Needle Position" button X The needle is correctly raised when the mark on the handwheel is at the top, as shown below. Check the handwheel and, if this mark is not at this position, press ("Needle Position" button) until it is. 1 a Mark on handwheel While holding the thread lightly with your f right hand, pull the thread with your left hand, and then pass the thread behind the thread guide cover and to the front. a Shutter Pass the thread behind the needle bar thread i guide. The thread can easily be passed behind the needle bar thread guide by holding the thread in your left hand, then feeding the thread with your right hand, as shown. 1 a Needle bar thread guide Next, use the needle threader to thread the j needle. Continue with the procedure in "Threading the needle" (page 34). a Thread guide cover 188