Brother International KE-430D Instruction Manual - English - Page 20
Installing the machine head, Plain washers [4 pcs]
View all Brother International KE-430D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3. INSTALLATION 3-4. Installing the machine head Pulse motor Approx. 20mm Approx. 20mm (1) Pins [2 pcs] (2) Set screws [2 pcs] (3) Rubber cushion assembly [2 pcs] Place the machine head gently on top of the oil pan and the rubber cushions. Note: • Be careful not to clamp any cords between the machine head and the oil pan. • When holding the machine head, do not hold it by the pulse motor, otherwise it may damage the pulse motor. 4406Q (4) Hinge holders [2 pcs] (5) Bolts [4 pcs] (6) Plain washers [4 pcs] (7) Spring washers [4 pcs] (8) Nuts [4 pcs] (9) Head spring (10)Head rest Note: • Check that the machine head switch is turned on as shown in Figure 1. • Tap the head rest (10) securely into the table hole. Figure1 13 4407Q KE-430D, BE-438D
3. INSTALLATION
13
KE-430D, BE-438D
3-4. Installing the machine head
(1) Pins [2 pcs]
(2) Set screws [2 pcs]
(3) Rubber cushion assembly [2 pcs]
Place the machine head gently on top of
the oil pan and the rubber cushions.
Note:
• Be careful not to clamp any cords
between the machine head and the
oil pan.
• When holding the machine head, do
not hold it by the pulse motor,
otherwise it may damage the pulse
motor.
(4) Hinge holders [2 pcs]
(5) Bolts [4 pcs]
(6) Plain washers [4 pcs]
(7) Spring washers [4 pcs]
(8) Nuts [4 pcs]
(9) Head spring
(10)Head rest
Note:
• Check that the machine head switch
is turned on as shown in Figure 1.
• Tap the head rest (10) securely into
the table hole.
4406Q
Pulse motor
Approx. 20mm
Approx. 20mm
4407Q
Figure
1