Brother International KE-430D Instruction Manual - English - Page 51

6. USING THE OPERATION PANEL (ADVANCED OPERATIONS) 1. Press the or key (1) to select the user program number that you would like to use. • If the user program number is flashing, depress the foot switch to move the feed mechanism to the home position. After this, it is not necessary to detect the home position until the next time the power is turned off and back on, even if you change the user program number. • User programs U1 to U10 can be selected directly using function keys F1 to F4 (2). (Refer to "6-8. Direct selection".) 2. Check that the needle drop position is correct, and then start sewing. (Refer to "5-5. /5-6. Checking the sewing pattern".) 4480Q • If you press the SELECT key (3), you can check the settings for the displayed user program (such as X-scale, Y-scale and sewing speed). 1 While pressing the TEST key, press the SELECT key. • Switch to user program recording mode. Check that the menu indicators are flashing. • User program number will appear in the PROGRAM No. display, and the program number will appear in the menu display. Press the or key to select the user program number which is to be cleared of data. 2 Clearing all user programs TEST indicator lights Menu indicators flash 4478Q Press the RESET key. • The buzzer will sound and the user program with the number selected will be cleared. Note: If a cleared user program has been stored as part of a cycle program, the step that involves that user program will become blank. The cycle program itself will not be cleared. Press and hold the RESET key for 2 seconds or more. • The buzzer will sound and the all user programs will be cleared. Note: If any cycle programs have been memorized, all of the memorized cycle programs will also be cleared. KE-430D, BE-438D 44