Brother International KE-430D Instruction Manual - English - Page 25

Connecting the ground wire, Ground wires from X, Y and work clamp encoder harnesses 3 wires

Get Brother International KE-430D PDF manuals and user guides View all Brother International KE-430D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

3. INSTALLATION 3-11. Connecting the ground wire CAUTION Be sure to connect the ground. If the ground connection is not secure, you run the risk of receiving a serious electric shock, and problems with correct operation may also occur. (1) Ground wire from upper shaft motor harness (2) Ground wire from the machine head (3) Ground wires from X, Y and work clamp encoder harnesses (3 wires) (4) Ground wire from operation panel harness * The recommended tightening torque for the ground screws is 1.0±0.1 N･m. Note: Make sure that the ground connections are secure in order to ensure safety. (5) Tighten the control box cover with the eight screws. Check that the cords are not clamped by the cover at this time. 4416Q KE-430D, BE-438D 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
3. INSTALLATION
18
KE-430D, BE-438D
3-11. Connecting the ground wire
CAUTION
Be sure to connect the ground. If the ground connection is not secure, you run the risk of receiving a serious electric
shock, and problems with correct operation may also occur.
(1) Ground wire from upper shaft motor harness
(2) Ground wire from the machine head
(3) Ground wires from X, Y and work clamp encoder harnesses (3 wires)
(4) Ground wire from operation panel harness
* The recommended tightening torque for the ground screws is 1.0±0.1 N
･
m.
Note:
Make sure that the ground connections are secure in order to ensure safety.
(5)
Tighten the control box cover with the eight screws. Check that the cords are not clamped by the cover at this time.
4416Q