Brother International KE-430D Instruction Manual - English - Page 63

TABLE OF ERROR CODES, Feed mechanism-related errors, Work clamp-related errors

Get Brother International KE-430D PDF manuals and user guides View all Brother International KE-430D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

9. TABLE OF ERROR CODES Feed mechanism-related errors Code E200 E201 E202 E204 E205 E206 E210 E211 E214 E215 E216 Cause and remedy X feed motor home position cannot be detected. Problem with X feed motor or poor X home position sensor connection. Turn off the power, and then check that connector P10 on the PMD P.C. board and connector P2 on the main P.C. board are properly connected. X feed motor stopped abnormally. Turn off the power and check that there is no problem with the X feed direction. Problem with X feed motor or Y feed motor home position adjustment data. Re-adjust the home position. X feed motor stopped abnormally during sewing. Turn off the power and check that there is no problem with the X feed direction. X feed motor stopped abnormally while moving to the sewing start position. Turn off the power and check that there is no problem with the X feed direction. X feed motor stopped abnormally during test feeding. Turn off the power and check that there is no problem with the X feed direction. Y feed motor home position cannot be detected. Problem with Y feed motor or poor Y home position sensor connection. Turn off the power, and then check that connector P8 on the PMD P.C. board and connector P3 on the main P.C. board are properly connected. Y feed motor stopped abnormally. Turn off the power and check that there is no problem with the Y feed direction. Y feed motor stopped abnormally during sewing. Turn off the power and check that there is no problem with the Y feed direction. Y feed motor stopped abnormally while moving to the sewing start position. Turn off the power and check that there is no problem with the Y feed direction. Y feed motor stopped abnormally during test feeding. Turn off the power and check that there is no problem with the Y feed direction. Work clamp-related errors Code E300 E301 E303 Cause and remedy Work clamp home position cannot be detected. Problem with work clamp motor or poor work clamp home position sensor connection. Turn off the power, and then check that connector P3 on the PMD P.C. board and connector P4 on the main P.C. board are properly connected. Work clamp raised or lowered position cannot be detected. Turn off the power, and check that there is no problem with the vertical work clamp position. Problem with work clamp motor home position adjustment data. Re-adjust the home position. Communication and memory-related errors Code E401 E403 E410 E411 E413 E420 E421 E422 E424 E425 E426 Cause and remedy Connection communication error with power supply motor P. C. board detected when power was turned on. Turn off the power, and then check that connector P6 on the power supply motor P.C. board and connector P14 on the main P.C. board are properly connected. Connection error with PMD P. C. board detected when power was turned on. Turn off the power, and then check that connector P1 on the PMD P.C. board is properly connected. Communication error with main P. C. board detected. Turn off the power, and then turn it back on again. Communication error with power supply motor P. C. board detected. Turn off the power, and then turn it back on again. Communication error with PMD P. C. board detected. Turn off the power, and then turn it back on again. No CF card is inserted. The program number is invalid or it has no corresponding data. Change the program number. Error occurred while reading CF card. Check the data on the CF card. Insufficient free space on CF card. Use a different CF card. Error occurred while writing to CF card. Use the specified type of CF card. R/W key has not been pressed. Press the R/W key to load the data. (Continued on next page) KE-430D, BE-438D 56

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
9. TABLE OF ERROR CODES
56
KE-430D, BE-438D
Feed mechanism-related errors
Code
Cause and remedy
E200
X feed motor home position cannot be detected. Problem with X feed motor or poor X home position sensor
connection.
Turn off the power, and then check that connector P10 on the PMD P.C. board and connector P2 on the main
P.C. board are properly connected.
E201
X feed motor stopped abnormally.
Turn off the power and check that there is no problem with the X feed direction.
E202
Problem with X feed motor or Y feed motor home position adjustment data.
Re-adjust the home position.
E204
X feed motor stopped abnormally during sewing.
Turn off the power and check that there is no problem with the X feed direction.
E205
X feed motor stopped abnormally while moving to the sewing start position.
Turn off the power and check that there is no problem with the X feed direction.
E206
X feed motor stopped abnormally during test feeding.
Turn off the power and check that there is no problem with the X feed direction.
E210
Y feed motor home position cannot be detected. Problem with Y feed motor or poor Y home position sensor
connection.
Turn off the power, and then check that connector P8 on the PMD P.C. board and connector P3 on the main P.C.
board are properly connected.
E211
Y feed motor stopped abnormally.
Turn off the power and check that there is no problem with the Y feed direction.
E214
Y feed motor stopped abnormally during sewing.
Turn off the power and check that there is no problem with the Y feed direction.
E215
Y feed motor stopped abnormally while moving to the sewing start position.
Turn off the power and check that there is no problem with the Y feed direction.
E216
Y feed motor stopped abnormally during test feeding.
Turn off the power and check that there is no problem with the Y feed direction.
Work clamp-related errors
Code
Cause and remedy
E300
Work clamp home position cannot be detected. Problem with work clamp motor or poor work clamp home
position sensor connection.
Turn off the power, and then check that connector P3 on the PMD P.C. board and connector P4 on the main P.C.
board are properly connected.
E301
Work clamp raised or lowered position cannot be detected.
Turn off the power, and check that there is no problem with the vertical work clamp position.
E303
Problem with work clamp motor home position adjustment data.
Re-adjust the home position.
Communication and memory-related errors
Code
Cause and remedy
E401
Connection communication error with power supply motor P. C. board detected when power was turned on.
Turn off the power, and then check that connector P6 on the power supply motor P.C. board and connector P14
on the main P.C. board are properly connected.
E403
Connection error with PMD P. C. board detected when power was turned on.
Turn off the power, and then check that connector P1 on the PMD P.C. board is properly connected.
E410
Communication error with main P. C. board detected.
Turn off the power, and then turn it back on again.
E411
Communication error with power supply motor P. C. board detected.
Turn off the power, and then turn it back on again.
E413
Communication error with PMD P. C. board detected.
Turn off the power, and then turn it back on again.
E420
No CF card is inserted.
E421
The program number is invalid or it has no corresponding data.
Change the program number.
E422
Error occurred while reading CF card.
Check the data on the CF card.
E424
Insufficient free space on CF card.
Use a different CF card.
E425
Error occurred while writing to CF card.
Use the specified type of CF card.
E426
R/W key has not been pressed.
Press the R/W key to load the data.
(Continued on next page)