Brother International KE-430D Instruction Manual - English - Page 56

7. SEWING 7. SEWING CAUTION Turn off the power switch at the following times, otherwise the machine may operate if the foot switch is depressed by mistake, which could result in injury. • When threading the needle • When replacing the needle and bobbin • When not using the machine and when leaving the machine unattended Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine. 4459Q 1. Turn on the power switch. 2. Press the or key (1) to select the number for the program to be sewn. 1st step 2nd step 49 3. Depress the foot switch to the 2nd step. The feed mechanism will move to the home position. 4441Q 4460Q 4. Set the material under the work clamp (2). (For the BE-438D, insert the button and place the material under the button clamp (3). (Refer to "4-7. Inserting the button".) 5. Depress the foot switch to the 1st step. The work clamp (2) / button clamp (3) will be lowered. 6. Depress the foot switch to the 2nd step. The sewing machine will start sewing. * If memory switch no. 003 is set to "ON", the work clamp (2)/button clamp (3) will drop to the intermediate stop position when the foot switch is depressed to the 1st step, and when it is depressed to the 2nd step, the material will be held and sewing will start. 7. Once sewing is completed and the thread has been trimmed, the work clamp (2) / button clamp (3) will rise. 4116M KE-430D, BE-438D