Brother International KE-430D Instruction Manual - English - Page 60
MAINTENANCE, <Applying grease>, Using the tube, Applying grease
View all Brother International KE-430D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
8. MAINTENANCE Use Brother-specified "Grease unit (SA8837-001)". 1. Using the tube 2. Applying grease Follow the procedure below to apply grease to the places indicated by arrows on the following page. Grease 4087M 4502Q Insert the tip of the tube (1) into the hole. While pushing the nozzle (1), squeeze the tube to apply grease to each hole. Tighten the screw (2) to push in the grease. 1. Turn off the power switch. 2. Remove the screw (2). (Refer to the following page for greasing locations.) 3. While turning the machine pulley by hand to move the needle bar up and down, apply grease to each hole until the grease overflows slightly. 4. Tighten the screw (2) to push in the grease. 5. Turn the machine pulley by hand to move the needle bar up and down several times in order to disperse the grease. 6. Use a cloth to wipe away any excess grease from around the screw (2). 7. Apply grease to all locations shown on the following page in the same way. 8. After this, carry out the reset procedure given on the following page. Note: • Once the grease tube has been opened, remove the nozzle from the tube, attach the cap securely and store the tube in a cool dark place. • The grease should be used as quickly as possible. • When using the grease again, remove any old grease from inside the nozzle first. (Store the tube away carefully once the tube has been opened, otherwise the grease remaining inside the tube may deteriorate, and this may affect its lubricating performance.) 4503Q 53 KE-430D, BE-438D