Brother International KE-430D Instruction Manual - English - Page 37
Inserting the button (BE-438D), 4-9. Installing the accessory spring (BE-438D)
View all Brother International KE-430D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
4-7. Inserting the button (BE-438D) 4. PREPARATION BEFORE SEWING 1. Press the button clamp plate cam (1) to open the button holder (2). 2. Insert the button, making sure that the button is facing the directing shown in the illustration, then release the button clamp plate cam (1). 4115M 4-8. Adjusting the button clamp (BE-438D) 0.5 - 1.0mm 1. Insert the button in the button clamp. Confirm that the button is securely held by the clamp. 2. Loosen the shoulder screw (1), while the button is held by the clamp. Move the adjusting plate (2) so that the space between the adjusting plate (2) and screw (3) is approximately 0.5 - 1.0 mm, then tighten the shoulder screw (1). 2660Q 4-9. Installing the accessory spring (BE-438D) If you would like the button to be raised up more after it is sewn, install the accessory spring. 1. Install the spring support (1) with the bolt (2). 2. Install the spring (3) with the washer (4) and the screw (5). 2661Q KE-430D, BE-438D 30