Brother International PR-1000 Upgrade KIT CW Operation Manual PRCW1 - Page 12
Switching to Cutwork Mode, Installing the Cutwork Needles, Finishing Cutwork mode
View all Brother International PR-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Switching to Cutwork Mode 2 The machine needs to be turned off after the "Cutwork" setting is set to on. a Touch to display the settings screen, and then touch beside "Cutwork". CREATING CUTWORK c Turn off the machine. → A message appears. b Touch . ■ Finishing Cutwork mode Be sure to turn Cutwork mode off, before you perform embroidery operation with all the needles available for your machine. To turn off Cutwork mode, touch beside "Cutwork" in the settings screen (described in step a). As directed in the message that appears, turn off the machine, replace the cutwork needles with the embroidery needles, and then turn the machine on again. Installing the Cutwork Needles 1 CAUTION • Be sure to turn off the embroidery machine before replacing the needles, otherwise injuries may result if the machine starts sewing. a Install the cutwork needles. Memo • For details on installing the cutwork needles, refer to "Replacing the Cutwork Needles" in the Installation Guide. 11