Brother International PR-1000 Upgrade KIT CW Operation Manual PRCW1 - Page 16

CREATING CUTWORK b Securely hoop the fabric with the stabilizer attached, and then attach the embroidery frame to the machine. Embroidering and Cutting 2 Note • For details on the patterns requiring watersoluble stabilizer, refer to "Patterns requiring water-soluble stabilizer" on page 6. a Remove the embroidery frame. b Remove the fabric cut outs created using the cutwork needles. Depending on the type of fabric that is used, some areas may not be fully cut. Use tweezers and scissors to carefully remove the cutout pieces without stretching the fabric. a Touch , and then press the start/ stop button to start embroidering. Note • When removing the cutout pieces, do not remove the fabric from the embroidery frame. → After the outlines of the cutout areas are sewn, the areas will be cut with the cutwork needles. After cutting with the cutwork needles, the machine will stop. Attaching Water-Soluble Stabilizer 2 After cutting, place the enclosed water-soluble stabilizer or similar product on the fabric, if necessary, and then embroider. Memo • If the cut edges will be sewn, for example, with satin stitching, use scissors to remove excess threads which will create a cleaner finish. • On the 10-needle machine, touch , and then press to move the embroidery frame toward you so that the fabric can be cleaned up without removing the embroidery frame. c Reattach the embroidery frame, or if you have moved the frame toward you using and on the 10-needle machine, touch position. to move it back into Note • Make sure not to replace the embroidery frame upside down, otherwise the pattern will become misaligned. 15