Brother International PR-1000 Upgrade KIT CW Operation Manual PRCW1 - Page 5

ABOUT CUTWORK ABOUT CUTWORK What is Cutwork? Cutwork is created when an embroidery design has an area that has been cut away and then reinforced around those sections with embroidery, there may also be stitching added within the open spaces to create gorgeous decorative patterns. After installing KIT CW to upgrade the machine, replace the embroidery needles in needle bars 1 through 4 with the corresponding cutwork needles which have been created with different angles so the machine can cut the fabric and embroider. Import a cutwork pattern from the enclosed CD-ROM1 (for machines) to the machine in order to create cutwork. For details on the patterns included with KIT CW, refer to the separate Pattern List. In addition, the cutwork pattern can be created using the machine to cut or sew satin stitching around the desired pattern. (Refer to "USING THE MACHINE TO POSITION EMBROIDERY PATTERNS FOR CREATING CUTWORK" on page 18) An original cutwork pattern designed in PE-DESIGN NEXT + CW can be imported into the machine to embroider cutwork. For details on installing PE-DESIGN NEXT + CW, refer to the Installation Guide. Memo • "Cutwork pattern" is a generic term used to refer to all the embroidery designs created with the cutwork needles, including cutout patterns, in this manual. 4