Brother International PR-1000 Upgrade KIT CW Operation Manual PRCW1 - Page 18

CREATING CUTWORK Dissolving Water-Soluble Stabilizer 2 a Remove the embroidery frame from the machine and the fabric from the frame. Use scissors to cut and remove the excess water-soluble stabilizer along the outline of the embroidery pattern. b Soak the fabric in warm water to melt away the remaining water-soluble stabilizer. a Turn off the embroidery machine. CAUTION • Unplug the power supply cord before cleaning the machine, otherwise injuries or an electric shock may occur. b Remove the needle plate and then use the brush to remove any lint and dust. Carefully clean and dust under and around the needle plate spacer before replacing the needle plate. [tex t-123] (AC ) Drying a Dry the fabric. And then iron it, if necessary. Note • When ironing, be sure to use the right iron temperature for the type of fabric to protect it from shrinking, scorching or becoming damaged. a Needle plate spacer Note • Since lint easily collects around the needle plate, it should be cleaned periodically. • While cleaning, be careful not to lose the spacer. c Open the hook cover, remove the bobbin case, and then use the brush to remove any fabric scraps and lint. Cleaning 2 When fabric and stabilizers are cut with the cutwork needles, fabric scraps and lint may be produced. Clean the needle plate, hook and bobbin case at least once a day or after each project which ever comes first. For details on cleaning them, refer to "Maintenance" in chapter 7 of your machine's Operation Manual. 17