Brother International PR-1000 Upgrade KIT CW Operation Manual PRCW1 - Page 22
Press, Check the displayed preview, and then, touch, if it is acceptable.
View all Brother International PR-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
USING THE MACHINE TO POSITION EMBROIDERY PATTERNS FOR CREATING CUTWORK d Press . → The following messages appear. f Press . e Check the displayed preview, and then touch if it is acceptable. If desired distance is not acceptable touch and repeat step c. → The embroidering screen appears. Note • If necessary, touch on the top right side of the screen to display a preview image, and then touch on the following screen to display an enlarged view of the pattern, in order to check the pattern position. → The embroidering settings screen appears again. Memo • Touching in the embroidering settings screen after specifying the settings clears all settings and edited data described above. • An appliqué piece can also be created by using water-soluble stabilizer, instead of fabric, as the appliqué base. For details on making an appliqué piece, refer to "Creating an appliqué piece" in chapter 4 of your machine's Operation Manual. 21