Brother International PR-1000 Upgrade KIT CW Operation Manual PRCW1 - Page 26

USING THE MACHINE TO POSITION EMBROIDERY PATTERNS FOR CREATING CUTWORK Memo • "Appliqué Distance" and "Cutting Line Distance" can also be specified on page 2 of the Settings screen. c Continue the procedure starting with step d in "Creating an appliqué with the outline around a pattern" on page 20. ■ Satin stitching along the outline of a desired frame shape, then cutting the fabric a Follow steps a and b in "Creating an appliqué with the outline around a pattern" on page 20. b Touch . Next, touch until the desired frame shape appears, and then select it. After changing the size and position of the frame, use the "Cutting Line Distance" keys to specify the distance of the cutting line from the edge of the satin stitching. b c d a e a Satin & Cut key b Frame type keys c Frame resizing keys d Frame positioning keys e Cutting Line Distance keys f Distance between cutting line and edge of satin stitching (frame) c Continue the procedure starting with step d in "Creating an appliqué with the outline around a pattern" on page 20. Editing Cutwork Patterns ■ Notes on creating cutwork patterns z Cutwork cannot be created if the pattern is too large or too complicated or an outline has been applied to a combined pattern. Even if the selected pattern fits within the embroidering area, the entire pattern may exceed the embroidering area when the outline is added. For details on the error messages that appear when creating patterns, refer to "ERROR MESSAGES" on page 32. z We recommend using the imported cutwork patterns without editing them. Rotating or resizing cutwork patterns may cause the cutting line and pattern to become misaligned or it may not be cleanly cut. Be sure to sew trial embroidery using same fabric and threads as project in order to check the embroidering and cutting results. z The color of the cutting line in the preview screens differ depending on the background color of the pattern display area. 25