Brother International PR-1000 Upgrade KIT CW Operation Manual PRCW1 - Page 30

USING THE MACHINE TO POSITION EMBROIDERY PATTERNS FOR CREATING CUTWORK Specifying Pause Locations Before Embroidering The timing for stopping the machine (pause locations) can be checked in the screen and, if necessary, pause locations can be specified. Pause locations can be specified in the change thread color screen, displayed by touching . By setting pause locations, as may be necessary, you can make sure if the embroidering is being successfully performed during an operation. Also, when creating cutwork by arranging multiple appliqué patterns, depending on the finished product, it may be necessary to pause the machine and change the fabric accordingly. a Touch in the pattern editing screen that appears after you finish editing the patterns. In this example, touch after you ungroup the pattern shown in step g on page 28. ■ Checking/adding the pause location Create a sample of the procedure described in "Arranging Multiple Copies of a Single Pattern to Make All Cuts at One Time" following steps a on page 26 through step g on page 28. The instructions on how to pause the machine before cutting the first pattern out are provided as follow. a b a First pattern to be embroidered b Cutting line → The change thread color screen appears. b Use and to check all the pause locations ( ) displayed in the thread color sequence display. In this example, a pause location is specified before embroidery begins after a previous pattern is cut out. a b a Thread color sequence display b Select the next/previous color in the thread color sequence display. 29