Brother International PR-1000 Upgrade KIT CW Operation Manual PRCW1 - Page 31
CAUTION, Deleting a pause location
View all Brother International PR-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
USING THE MACHINE TO POSITION EMBROIDERY PATTERNS FOR CREATING CUTWORK c Use and to display the thread color (or cutwork needle) where the machine will be paused before being sewn (being cut) at the top of the thread color sequence display, and then touch . In this example, specify a pause location as follow to pause the machine before the first pattern is cut out. d Touch . Memo • If the patterns are grouped, the sewing order of colors in the combined border embroidery pattern is automatically changed so that the same color can be continuously sewn. a a a Thread color (or cutwork needle) where you wish to stop the machine before embroidering it (cutting it) → appears to indicate where the machine will be paused. a Pause location The pause locations are specified as follow after you ungroup the patterns by touching in the pattern editing screen. ... Note • Complete pattern editing before you start checking/adding/deleting pause locations for the selected pattern. ■ Deleting a pause location Refer to step c to display the thread color (or cutwork needle) with the pause location to be deleted at the top of the thread color sequence display, and then touch . An unnecessary pause location can also be deleted after a trial embroidery. CAUTION • Be careful when deleting pause locations. If a pause location is incorrectly deleted, the fabric may be cut or embroidered at an unintended location. 30